How-To Apply

Professional results at home — TrueCurve™ application guide
These instructions cover both pre-shaped segmented lashes and full-band TrueCurve™ lashes.

What you’ll need

  • GlowVane lashes (style of choice)

  • GlowVane Lash Bond (or recommended adhesive)

  • Precision tweezers or applicator

  • Small mirror & cotton swab

  • Lash curler (optional)

Step 1 — Prep

  • Clean your natural lashes and lid area of oils and makeup. A clean base ensures strong adhesion.

  • If using mascara, apply it to natural lashes first and allow to dry.

Step 2 — Measure & Trim (for full band)

  • Align the band to your lash line; trim the outer edge if the band extends past your eye. Trim from the outer (longer) side only.

Step 3 — Apply Glue

  • For segments: place a thin line of glue on the band; wait 15–30 seconds until it becomes tacky.

  • For full band: apply a thin, even layer along the band. Wait until tacky.

Step 4 — Placement

  • Using tweezers/applicator, place the lash segment close to your natural lash roots (not on eyelid skin). For full band, start at center then press inner and outer corners.

  • Gently press along the band to secure. Use the back of the tweezers to push lashes slightly upward to blend.

Step 5 — Blend & Finish

  • Lightly press natural lashes and false lashes together, or use an eyelash curler to create a unified curve. For a more natural finish, use a small amount of eyeliner to conceal the band if needed.

Removal & Cleaning

  • Use an oil-free remover or dedicated lash remover. Soak a cotton pad and hold for 5–10 seconds, then gently slide the lash off. Clean residual glue from the band and store.

Troubleshooting

  • Lash lifting at corner: add a tiny dot of glue and re-press.

  • Discomfort: ensure adhesive is not applied to eyelid skin; reapply with minimal glue.

  • Short hold: ensure glue was tacky before placement; avoid oil-based skincare.